CNC Turning Centers - Mazak Multiplex Triple3 8200Y

CNC Turning Centers

Multi-Tasking Turning Centers

Vertical Machining Centers

Horizontal Machining Centers

CNC Laser Cutting Machines

CPC Software

Hi-Tech Machine Tools (Pty) Ltd
P.O. Box 931, Bedfordview, 2008
6 Nguni Drive, Longmeadow West, Modderfontein, South Africa

Contact Person:
Peter J. Killian
Managing Director

Tel: +27 (0)11 608-0088
Fax: +27 (0)11 608-0148
Email: info@hitech.co.za

Home > CNC Lathe Machine Tools > Mazak Multiplex Triple3 8200Y

Opposed spindles multi-tasking CNC lathe

Opposed 2 spindles / 1 chucking of 3 turrets
Completely finish workpieces in a single machine setup

Continuous / simultaneous machining by both spindles in just one chucking
Can be equipped with Gantry Robot and bar feeder interface

MULTIPLEX 3 8200Y for higher productivity

Features a lower turret with milling ability to increase the number of available tools and perform 4-axis simultaneous machining.Rapid traverse rate of 50 m / min for X1, X2, Z1, Z2 axis and 1G acceleration make it possible to reduce machine down time. A grease lubrication system is used for the linear guides and ball screws to minimize industrial waste.

MULTIPLEX 3 8200Y for higher productivity

SPECIFICATIONS
Capacity	Maximum swing:320mm(12.6") Distance between spindles at Z-axis home position:1485mm Bar work capacity:65 mm(2.55")
Feedrate	X1, X2-axes:50000 mm/min X3-axis:38000 mm/min Y1, Y2-axes:20000 mm/min Z1, Z2-axes:50000 mm/min Z3-axis:38000 mm/min C1, C 2-axes:400rpm
Spindle	No. of spindles:2 Spindle speed:5000rpm Motor (30min. rating):22kW(30HP)
Upper turret	No. of turrets:2 Turret type:12 position drum turret(VDI type) Number of tools:12X2 tools (Rotary tools can be mounted on all positions)
Lower turret	Turret type:9 position drum turret(Bolt-on type) Number of tools:9 tools (The maximum 6 rotary tools can be mounted)
Rotary tool spindle	Spindle speed:4500rpm Motors Upper turret(10 min. rating):5.5kW (7.5HP) Lower turret(3 min. rating):3.7kW (5HP)