| |
HCN4000-II |
| X-axis travel (column travel left / right) |
560mm (22.05") |
| Y-axis travel (spindle head travel up / down) |
630mm (24.8") |
| Z-axis travel (pallet forward / backward) |
640mm (25.2") |
| Distance from spindle nose to pallet center |
70-710mm (2.76"`27.96") |
| Distance from spindle center to pallet top |
80-710mm (3.15"`27.95") |
| |
| Pallet Size |
400mm~400mm (15.75"~15.75") |
| Max. workpiece dimensions |
ƒÓ630mm~900mm (ƒÓ24.8"~35.43") |
| Pallet load capacity (evenly distributed) |
400kg (882lbs) |
| Pallet top surface |
M16xP2(5/8 - 11 UNC)
Tap 25 places, pitch: 80 mm (3.15") |
| Min. Table indexing angle increment |
‚P‹ |
| Table indexing time |
1.3sec / 90‹ |
| |
| Number of pallets |
2 |
| Pallet change system |
Rotary type |
| Pallet change time |
6.0sec |
| @ |
| Max. Spindle speed |
18000min-1(rpm) |
| Spindle gear range |
2 |
| Spindle taper |
7/24taper CAT No.40 |
| Spindle bearing size (I.D.) |
ƒÓ70mm (ƒÓ2.75") |
| Spindle acceleration to top speed |
1.88sec(0¨18000min rpm) |
| @ |
| Rapid traverse rate (X, Y, Z axes)*1 |
60000mm/min (2362IPM) |
| Cutting feedrate (X, Y, Z axes)*1 |
1-60000mm/min (0.04`2362IPM) |
| Axis acceleration / deceleration |
0.8G |
| @ |
| Tool shank type |
CAT No.40 |
| Tool magazine capacity |
40 |
| Max. Tool dia. / Length (from gauge line) / Weight |
ƒÓ95mm/420mm/12kg
(ƒÓ3.74/ƒÓ16.53/26lbs) |
| Max. Tool dia (when adjacent pocket empty)*2 |
ƒÓ150mm (ƒÓ5.9") |
| Tool selection method |
Random selection / shortest pass |
| Tool change time (chip-to-chip) |
2.7sec |
| @ |
| Main spindle motor (30 min. / Cont. rating) |
30kW/25kW (40HP/33.5HP) |
| Flood coolant pump motor (50Hz / 60Hz) |
730W/1210W |
| |
|
Electrical power supply (30 min. / Cont.rating) |
63.9kVA/156.9kVA |
Air supply pressure |
0.5-0.9MPa(71.17`128.10PSI)
/ 200L/min (7.06ft3/min) |
| @ |
| Machine height |
2791mm (109.89") |
| Floor space requirement |
2160mm~5503mm (85.04~208.78") |
| Machine weight |
9500kg (20944lbs) |
4000 - II 