|
HCN6800-II |
| X-axis travel (column travel left / right) |
1050mm (41.34") |
| Y-axis travel (spindle head travel up / down) |
900mm (35.43") |
| Z-axis travel (pallet forward / backward) |
980mm (38.58") |
| Distance from spindle nose to pallet center |
100-1080mm (3.94"`42.52") |
| Distance from spindle center to pallet top |
100-1000mm (3.94"`39.37") |
| |
| Pallet Size |
630mm~630mm (24.8"~24.8") |
| Max. workpiece dimensions |
ƒÓ1050mm~1300mm (Dia. 41.34"`51.18") |
| Pallet load capacity (evenly distributed) |
1500kg (3307lbs) |
| Pallet top surface |
M16xP2(5/8 - 11 UNC)
Tap 25 places, pitch: 125 mm (4.92") |
| Min. Table indexing angle increment |
‚P‹ |
| Table indexing time |
2.3sec / 90‹ |
| |
| Number of pallets |
2 |
| Pallet change system |
Rotary type |
| Pallet change time |
10.0sec |
| @ |
| Max. Spindle speed |
10000min-1(rpm) |
| Spindle gear range |
2 |
Spindle taper CAT No.50
|
7/24taper No.40 |
| Spindle bearing size (I.D.) |
ƒÓ100mm (ƒÓ3.94") |
| Spindle acceleration to top speed |
3.0sec(0¨10000min@rpm) |
| @ |
| Rapid traverse rate (X, Y, Z axes)*1 |
60000mm/min (2362IPM) |
| Cutting feedrate (X, Y, Z axes)*1 |
1-60000mm/min (0.04`2362IPM) |
| Axis acceleration / deceleration |
0.8G |
| @ |
| Tool shank type |
CAT NO.50 |
| Tool magazine capacity |
43 |
| Max. Tool dia. / Length (from gauge line) / Weight |
ƒÓ125mm/630mm/30kg
(ƒÓ4.92"~ƒÓ24.80"~66lbs) |
| Max. Tool dia (when adjacent pocket empty)*2 |
ƒÓ260mm (ƒÓ10.24") |
| Tool selection method |
Random selection / shortest pass |
| Tool change time (chip-to-chip) |
4.2sec |
| @ |
| Main spindle motor (30 min. / Cont. rating) |
37kW/30kW(50HP/40HP) |
| Flood coolant pump motor (50Hz / 60Hz) |
730W/1210W |
Electrical power supply (30 min. / Cont.rating) |
77.4kVA/69.2kVA |
Air supply pressure |
0.5-0.9MPa(71.17-128.10PSI)
/ 350L/min (12.40ft3/min) |
| @ |
| Machine height |
3397mm (133.74") |
| Floor space requirement |
3301mm-6302mm (129.96~248.12") |
| Machine weight |
19000kg (41800lbs) |
6800 - II 