Mazak Vertical Center 
410A - II
VCN410A-II |
VCN410B-II |
VCN510C-II |
VCN515C-II |
||
| X axis stroke (table right/left) | mm |
560(22.05") |
762(30.00") |
1050(41.34") |
|
| Y axis stroke (saddle back/forth) | 410(16.14") |
510(20.08") |
|||
| Z axis stroke (spindle up/down) | 510(20.08") |
560 (20.05") |
|||
| Distance from table top to spindle nose | 150(5.90")`660(25.98") |
150(5.90")`710(27.95") |
|||
| Distance from column surface to spindle center |
504(19.84") |
576(22.67") |
571(22.48") |
||
| Table size | 900~410 (35.43~16.14") |
1100~410 (43.31~16.14") |
1300~550 (51.18~21.65") |
||
| Max. load capacity (evenly distributed) | kg |
500(1100lbs) |
700(1540lbs) |
1200(2640lbs) |
|
| Table surface configuration | @ | 18mm(0.71") T-slot X 3/125mm(4.92") pitch |
18mm(0.71")~5/100mm(3.93") pitch |
||
| Max. Spindle speed | rpm
|
12000 15000(option25000) |
8000 |
||
| Spindle speed range | @ |
Stepless |
|||
| Spindle taper | @
|
No.40 |
No.50 |
||
| Spindle acceleration to top speed | sec.
|
2.04 1.9 |
1.41 |
||
| Rapid traverse rate | m/min |
36(1417IPM) 50(1968IPM) |
42(1654 IPM) |
||
| Cutting Feedrate | mm/min |
1-36000(0.03-1417IPM) |
1-42000 (0.03-1654 IPM) |
||
1-5000(0.03-1968IPM) |
1-5000(0.03-1968IPM) [1-36000(0.03-1417IPM)] |
||||
| Acceleration / Deceleration of axis | G |
0.5 0.5G/0.75G(X,YAxis/ZAxis) |
0.5 |
||
0.5 0.5G/0.75G(X,YAxis/ZAxis) |
0.5G/0.75G(X,Y axes/Z axis) |
||||
| Tool shank type | @@ |
CAT40 |
CAT No.50 |
||
| Tool storage capacity | –{ |
30 30(option60) |
24 |
||
| Max. tool diameter with adjacent tool pockets empty |
mm |
ƒÓ80(3.15") |
ƒÓ105(3.15") |
||
ƒÓ125(4.92") |
ƒÓ210 (8.27") |
||||
| Max. tool length | mm |
350(13.78") |
|||
| Max. tool weight | kg |
8(17.64lbs) |
20(44.10 lbs) |
||
| Tool selection method | @ |
MAZATROL random memory |
Random selection / Shortest path |
||
| Tool change time (chip to chip) | sec. |
1.3 |
2.0 |
||
| Spindle motor | |||||
| (5min./10min./30min./cont. rating) (15min./Cont. rating) |
AC/kW |
18.5/15/11/7.5(25/20/15/10HP) 30/22(40/30HP) |
AC 30/22 (40/30 HP) (30 min.rating/cont.rating) |
||
| Electrical power supply (30min. /Cont. rating) |
kVA |
27.39/22.41 (30min./cont.rating) 61.15/49.48 (15min./cont.rating) |
29.41/24.43 (30min./cont.rating) 63.18/51.44 (15min./cont.rating) |
63.87/52.14 (30min./cont.rating) 30.88/25.9 (15min./cont.rating) |
56.7/45.2 (30 min./cont.rating) |
Air supply (pressure / volume) |
Mpa/NL |
0.5/200 (72PSI/7.0ft3/min) 0.5/300(72PSI/10.5ft3/min) |
0.5/200 (72PSI/7.0ft3/min) |
||
Machine height from floor (standard/Coolant through spindle spec.) |
mm |
2773/2807 (109.17"/110.51") 2676/2676 (105.35"/105.35") |
2843/2877 (111.93"/113.27") 2801/2801 (110.28/110.28") |
2810 (110.63") |
|
| Required floor space | mm |
2093.5~2600 (80.30"~102.36") 2093.5~2808 (80.30"~110.55") |
2573.5~2600 (101.32"~102.36") 2573.5~2808 (101.32"~110.55") |
2973.5~2835 (117.07"~111.61") 2973.5~3043 (117.07"~119.80") |
2924~2835 (115.12"~111.64") |
| Machine weight | kg |
4920(10824lbs) 5630(12412lbs) |
5570(12280lbs) 5890(12985lbs) |
6900(15180lbs) 7600(16755lbs) |
7830(17262 lbs) |